Elliptic Curve Diffie Hellman (ECDH) is an Elliptic Curve variant of the standard Diffie Hellman algorithm. See Elliptic Curve Cryptography for an overview of the basic concepts behind Elliptic Curve algorithms.
ECDH is used for the purposes of key agreement. Suppose two people, Alice and Bob, wish to exchange a secret key with each other. Alice will generate a private key dA and a public key QA=dAG (where G is the generator for the curve). Similarly Bob has his private key dB and a public key QB=dBG. If Bob sends his public key to Alice then she can calculate dAQB=dAdBG. Similarly if Alice sends her public key to Bob, then he can calculate dbQA=dAdBG. The shared secret is the x co-ordinate of the calculated point dAdBG. Any eavesdropper would only know QA and QB, and would be unable to calculate the shared secret.
Outputs the EC key in PEM encoding. If cipher and passphrase are given they will be used to encrypt the key.cipher must be an OpenSSL::Cipher instance. Note that encryption will only be effective for a private key, public keys will always be encoded in plain text. #define ECDHFECDHCOMPUTEKEY 100: 114: #define ECDHFECDHDATANEWMETHOD 101: 115: 116 /. Reason codes./ 117: #define ECDHRKDFFAILED 102: 118: #define ECDHRNONFIPSMETHOD 103: 119: #define ECDHRNOPRIVATEVALUE 100: 120: #define ECDHRPOINTARITHMETICFAILURE 101: 121: 122.
Aug 19, 2019 DHcomputekey computes the shared secret from the private DH value in dh and the other party's public value in pubkey and stores it in key. Key must point to DHsize (dh) bytes of memory. Mar 12, 2021 ECDHcomputekey performs Elliptic Curve Diffie-Hellman key agreement. It combines the private key contained in ecdh with the other party's publickey, takes the x component of the affine coordinates, and optionally applies the key derivation function KDF. It stores the resulting symmetric key in the buffer out, which is outlen bytes long.
Using ECDH in OpenSSL[edit]
In order for two peers to exchange a shared secret they need to first agree on the parameters to be used. In Elliptic Curve Cryptography this is typically done through the use of named curves. A named curve is simply a well defined and well known set of parameters that define an elliptic curve. OpenSSL has support for a wide variety of different well known named curves. In the example below the ANSI X9.62 Prime 256v1 curve is used.
The ecieskeyderivation function uses // SHA 512 to ensure we have a sufficient amount of envelope key material and that the material created is sufficiently secure. Else if (ECDHcomputekey (envelopekey, SHA512DIGESTLENGTH, ECKEYget0publickey (user), ephemeral, ecieskeyderivation)!= SHA512DIGESTLENGTH).
The example below shows how to set up the parameters based on the use of a named curve, how to generate a public/private key pair for those parameters and subsequently how to derive a shared secret. The details of how to obtain the other party's key (the peer key) are omitted, as this is specific to your particular situation. Note that you do not necessarily need to generate a new private/public key pair for every exchange (although you may choose to do so). Mock invoice pdf. Also note that the derived shared secret is not suitable for use directly as a shared key. Typically the shared secret is passed through some hash function first in order to generate a key.
See below for the example code.
You should also refer to the EVP Key Agreement page for general information on the key agreement API in OpenSSL.
Using the Low Level APIs[edit]
Users of the OpenSSL library are expected to normally use the EVP method for working with Elliptic Curve Diffie Hellman as described above and on the EVP Key Agreement page. The EVP API is implemented by a lower level ECDH API. In some circumstances, expert users may need to use the low level API. This is not recommended for most users. However, if you need to use this then an example of use is shown below.
As noted in the high level EVP section of this page, you should never use a shared secret directly. It must be passed through some form of key derivation function (KDF) first. The last argument to ECDH_compute_key can optionally pass a function pointer for such a KDF. The shared secret will then be passed through this function and the value returned in the output buffer will be suitable for direct use as a key.
The function below is taken from apps/speed.c in the OpenSSL codebase, and shows an example of a KDF based on the hash function SHA1.
SHA1 may not be appropriate if the key length required is longer than the number of bits provided as output from the hash function. Combine csv files into one excel workbook. A standards based KDF which can be used to derive longer keys is described in: http://www.secg.org/collateral/sec1.pdf (see section 3.6.1)
ECDH and Named Curves[edit]
If you want to save a key and later load it with SSL_CTX_use_PrivateKey_file, then you must set the OPENSSL_EC_NAMED_CURVE flag on the key. You do that by calling EC_KEY_set_asn1_flag(ecKey, OPENSSL_EC_NAMED_CURVE). Failure to do so will result in a SSL error of 0x1408a0c1 (no shared cipher) at the server.
As an example, the following creates a elliptic curve key and saves it using a named curve rather than an expanded list of group paramters:
If you want to detect the flags after reading a key or certificate from disk, then use the following code:
The certificates below were dumped with openssl x509 -in server-ecdsa-cert.pem -text -noout. The certificate on the left was created with a key using OPENSSL_EC_NAMED_CURVE, while the certificate on the right was not. Notice the certificate on the left includes ASN1 OID: prime256v1. The certificate on the left can be used with SSL server using ECDSA, but the certificate on the right cannot because it will result in 0x1408a0c1 at the server.
Figure 1: Key with OPENSSL_EC_NAMED_CURVE | Figure 2: Key without OPENSSL_EC_NAMED_CURVE |
If you use a key or certificate without without the OPENSSL_EC_NAMED_CURVE flag (i.e., one that looks like the image on the right), then the SSL connection will fail with the following symptoms:
Note that OpenSSL's X509_verify, X509_verify_cert, SSL_CTX_check_private_key, SSL_CTX_use_PrivateKey_file, and SSL_CTX_use_certificate_chain_file will not return a failure when using a key or certificate in the wrong format.
See also[edit]
Users of the OpenSSL library are expected to normally use the EVP method for working with Elliptic Curve Diffie Hellman as described above and on the EVP Key Agreement page. The EVP API is implemented by a lower level ECDH API. In some circumstances, expert users may need to use the low level API. This is not recommended for most users. However, if you need to use this then an example of use is shown below.
As noted in the high level EVP section of this page, you should never use a shared secret directly. It must be passed through some form of key derivation function (KDF) first. The last argument to ECDH_compute_key can optionally pass a function pointer for such a KDF. The shared secret will then be passed through this function and the value returned in the output buffer will be suitable for direct use as a key.
The function below is taken from apps/speed.c in the OpenSSL codebase, and shows an example of a KDF based on the hash function SHA1.
SHA1 may not be appropriate if the key length required is longer than the number of bits provided as output from the hash function. Combine csv files into one excel workbook. A standards based KDF which can be used to derive longer keys is described in: http://www.secg.org/collateral/sec1.pdf (see section 3.6.1)
ECDH and Named Curves[edit]
If you want to save a key and later load it with SSL_CTX_use_PrivateKey_file, then you must set the OPENSSL_EC_NAMED_CURVE flag on the key. You do that by calling EC_KEY_set_asn1_flag(ecKey, OPENSSL_EC_NAMED_CURVE). Failure to do so will result in a SSL error of 0x1408a0c1 (no shared cipher) at the server.
As an example, the following creates a elliptic curve key and saves it using a named curve rather than an expanded list of group paramters:
If you want to detect the flags after reading a key or certificate from disk, then use the following code:
The certificates below were dumped with openssl x509 -in server-ecdsa-cert.pem -text -noout. The certificate on the left was created with a key using OPENSSL_EC_NAMED_CURVE, while the certificate on the right was not. Notice the certificate on the left includes ASN1 OID: prime256v1. The certificate on the left can be used with SSL server using ECDSA, but the certificate on the right cannot because it will result in 0x1408a0c1 at the server.
Figure 1: Key with OPENSSL_EC_NAMED_CURVE | Figure 2: Key without OPENSSL_EC_NAMED_CURVE |
If you use a key or certificate without without the OPENSSL_EC_NAMED_CURVE flag (i.e., one that looks like the image on the right), then the SSL connection will fail with the following symptoms:
Note that OpenSSL's X509_verify, X509_verify_cert, SSL_CTX_check_private_key, SSL_CTX_use_PrivateKey_file, and SSL_CTX_use_certificate_chain_file will not return a failure when using a key or certificate in the wrong format.
See also[edit]
ECDH_compute_key, ECDH_size — Elliptic Curve Diffie-Hellman key exchange
#include
intECDH_compute_key(void *out, size_t outlen, const EC_POINT *public_key, EC_KEY *ecdh, void *(*KDF)(const void *in, size_t inlen, void *out, size_t *outlen));
intECDH_size(const EC_KEY *ecdh);
ECDH_compute_key() performs Elliptic Curve Diffie-Hellman key agreement. It combines the private key contained in ecdh with the other party's public_key, takes the x component of the affine coordinates, and optionally applies the key derivation function KDF. It stores the resulting symmetric key in the buffer out, which is outlen bytes long. If KDF is NULL, outlen must be at least ECDH_size(ecdh).
ECDH Is Included In The Ciphersuites, So The Only Answer Is: Yes, This Should Be Possible. For Your Further Research, It Might Help To Know That C..
ECDH_size() returns the number of bytes needed to store an affine coordinate of a point on the elliptic curve used by ecdh, which is one eighth of the degree of the finite field underlying that elliptic curve, rounded up to the next integer number.
ECDH_compute_key() returns the length of the computed key in bytes or -1 if an error occurs.
ECDH_size() returns the number of bytes needed to store an affine coordinate.
DH_generate_key(3), DH_size(3), EC_GROUP_new(3), EC_KEY_new(3), EC_POINT_new(3), X25519(3)
Vehuiah sigil the movie. ECDH_compute_key() first appeared in OpenSSL 0.9.8 and has been available since OpenBSD 4.5.
EVP Key And Parameter Generation - OpenSSLWiki
ECDH_size() first appeared in OpenBSD 6.1.
